Gyeon Q2 CanCoat

Gyeon Q2 CanCoat

Write a Review
Q2 CanCoat
Calculated at Checkout

Gyeon Q2 CanCoat

Extremely Good Looks and Deep Shine

CanCoat is so good and easy to use, that it's almost like cheating! It goes on very quickly and very easy to use, has amazing hydrophobic characteristics, provides great gloss, and lasts up to 6 months. One coat is all you need, but if you like to apply multiple coats, do so with just a few hours between applications. For best results, maintain with Gyeon Cure after each time you wash the vehicle. 

To apply, just spray directly into your microfiber towel, and then gently wipe onto the surface of the car. Once applied to one panel at a time, remove any light residue with a secondary towel to reveal a high level of shine. For best results, do not expose the vehicle to water for at least 12 hours.

Despite the ease of application, Q2 CanCoat has been designed to provide best possible looks. It gives a slight darkening effect, enhancing the gloss and depth of dark colored paints and adds a smooth, deep finish to light ones. While cured, it leaves a very sleek, protective layer.

Q2 CanCoat applied to your vehicle’s paint provides you a protective layer against UV-rays, strong chemicals, bird droppings or road salt, and also prevents the paint’s oxidation. Q2 CanCoat will retain most of its hydrophobic and self-cleaning abilities up to 6 months.

Simply spray onto the paint and wipe off till receiving final gloss with a soft, HQ microfiber towel. That's how easy it is to apply Q2 CanCoat! This product is the first one providing outstandingly good and durable SiO2 based coating, that comes in a aerosol loaded can and is so easy to apply

Important Notes

  • Please be sure to use all coatings as soon as you can from the time you receive them.
  • All coatings have a limited shelf life due to the chemical nature of how they crystallize. Look to use coatings within 4-6 months of receiving them.

2 Reviews Hide Reviews Show Reviews

  • 5
    CanCoat...where ya been all my life?

    Posted by KF on 19th Oct 2017

    What an incredibly easy and effective product to use. The look and feel of the surface after application is very, very nice and the application takes about a whole 10 minutes, no runs, no streaks, no errors.

    Water behavior, appearance and self-cleaning are on par with a ‘full fledged’ coating product and in the right situation, a product like this might even be a preferred solution for a vehicle/owner who is somewhat less OCD-ish or unwilling to invest the time and cost in a full correction/coating job for their vehicle. Maintained via wash with Gyeon Bathe+ on a somewhat regular basis, or post-wash with Gyeon WetCoat and I’ll bet the longevity exceeds the claimed 6 months. Add Gyeon Cure on occasion and it’ll likely stretch longer according to some accounts I’ve read.

    I applied panel by panel by spritzing a Gyeon PolishWipe towel with 2-4 shots of CanCoat, going over panel in a somewhat regular motion of up/down then side-to-side to insure complete coverage then buffing the entire area with an Esoteric Ultra Premium Microfiber towel. For me, it was easier than using a quick detailer as it wiped clean quite easily, leaving no streaks but rather a clean, shiny, slick surface with that desirable ‘coating look’ to it. Waited 24 hours and then tossed a 32oz cup of water at the hood which beaded nicely before gravity took over and they rolled off the panel. Leftover beads that gravity had ignored wiped cleanly off, leaving a great finish. Looking forward to some rain so I can pull it outside and watch it work.

    I had CanCoat sitting unused on my shelf for the last 6 months, never really sure when/what to use it for. In this case I had a bright red Ford Ranger than I had prepped and applied Gyeon Mohs to back in February of 2017. Being a fleet vehicle it had been sitting outside 24/7 since then, had never been washed or received any attention outside of an occasional shower by Mother Nature. Although the truck was still staying cleaner than many other vehicles in our fleet that I had coated (with a variety of things) it’s had lost that ‘coating feel’ to it that Mohs & Cure brings to a surface. I probably could have brought it back with merely Cure but I wanted to finally give CanCoat a try.

    With the mentality of ‘nothing ventured, nothing gained’ I foamed the truck with Gyeon Foam at 1:5 dilution using the MTM PF22 Cannon/SG35 spray gun setup, rinsed it, gave it and application of Sonax Fallout Cleaner, rinsed, washed with Gyeon Bathe, dried, wiped down with Gyeon Prep and then snatched up the CanCoat. Having never used it before the initial panels I did with sort of a ‘coating mentality’ during application, slow and deliberate. By the end of the truck I realized the flexibility of application with the CanCoat allowed for a less concentrated approach to application, hence one of its benefits methinks. A few spritzes on application towel, back and forth, up and down, buff with second towel to insure full removal of any excess; I really don’t think it could get any easier.

    Pondering what situations CanCoat would be ideal for (in addition to topping a Mohs or Prime application which I have heard adds some nice gloss and durability), I go back to when I was a bit less OCD-ish and less knowledgeable about our cars appearance and protection. Back in 2004 when we bought our new, black Corvette a certain ‘Z sealant’ was all the rage among Corvette owners. It provided a nice look with somewhat decent longevity but in the end, offered little protection from water spotting and other environmental contamination; despite numerous applications over the years, usually in Spring after claying and then once or twice the rest of the season, we were left with etched water spots in the paint. Additionally, the self-cleaning properties of the sealant were pretty much nonexistent. Had I used CanCoat instead (if it would have been available), perhaps 2 or 3 times a year, I’m pretty confident the protection and self-cleaning properties of it would have eliminated the etching of the paint. And I likely would have not needed to wash it as frequently, which would have reduced the buildup of wash-induced marring as well as being far easier and quicker to apply.

    I could also see this as being an economical and effective product to use for those who do not wish to spend the time and money prepping and applying more ‘complete’ coating solution. Prep and perhaps a light polish once a year, a CanCoat application or two over that year and you’re getting the protection, self-cleaning and appearance properties of a coating without the more significant investment of time and money a more ‘semi-permanent’ coating would involve, especially for the casual DIY’er.

    In fact, given the low cost of CanCoat, I can see it being a viable replacement for a sealant if you like or want the look, feel, protection and self-cleaning properties of a coating. It’s actually much easier to apply than most sealants (for me anyway) as well.

    I’m really quite enamored with the ease of use and effectiveness of this product; it’s just so very handy to have around that I’ll likely keep a bottle on the shelf for quick use in the situations that warrant it. Will be interesting to see how it does going forward and it’s an easy way to ‘wow’ people with minimal effort and cost.

  • 5
    Ease of use and performance make this a real winner

    Posted by Bradley on 19th Sep 2016

    Easy to use application, great durability, awesome hydrophobic and self cleaning effects. Although it does not have the hardness of a true glass coating, can coat is a great way to dip your toes into the coating world.