Rupes DA Blue Coarse Foam Pads

New for 2020

Starting development from the ground-up, Rupes has developed all new abrasives and pads that will greatly broaden the effectiveness of their product line.

For best results, look to couple the DA Blue Coarse Foam Pads with Rupes DA Coarse Compound.

RUPES Pad color chart:

Blue = Light Compounding
Yellow = Polishing
White = Finishing

RUPES Blue Coarse Foam Pad, 30/40mm

These extra small pads are great for the tightest of areas that you may run into when correcting paint- mirror stalks, window trim, air inlets, etc. The Rupes 30/40mm pads were designed for use with the 30mm backing plate of the pneumatic LD30 machine, as well as the 30mm backing plate of the electric Nano iBrid.

RUPES Blue Coarse Foam Pad, 55/70mm

These small pads provide flexibility to get into tight areas, while also providing a slightly larger footprint than the 30/40mm pads. The Rupes 55/70mm pads were designed for use with the 55mm backing plate of the pneumatic TA50 machine, as well as the 55mm backing plate of the electric Nano iBrid.

RUPES Blue Coarse Foam Pad, 80/100mm

The Rupes 80/100mm pads are perfect for tight areas...A-pillars, mirrors, bumpers, rocker panels, or just spot correction, and were designed specifically for the LHR75 pneumatic polisher. You can also use with your Porter Cable, Griot's, FLEX, or Meguiar's D/A polishers when using a 3" backing plate.

RUPES Blue Coarse Foam Pad, 130/150mm

The Rupes 130/150mm pads were made specifically for the Rupes LHR15ES polisher  to create a perfect balance, but can be used on any machine with a 5" backing plate. These are perfect pads for use with your Porter Cable, Griot's, FLEX, or Meguiar's D/A polishers when using a 5" backing plate.

RUPES Blue Coarse Foam Pad, 155/180mm

The Rupes 155/180mm pads were made specifically for the Rupes LHR21ES polisher to create a perfect balance, but can be used on any machine with a 6" backing plate.